Troubleshooting
100
9
Error: Finisher The stapler is damaged. The stapler needs to be repaired.
Contact your sales or service rep-
resentative.
Load {paper size}
Tray #
Tray # is empty. Load {paper size} paper into Tray
#.
⇒
P.93 “Loading Paper and Oth-
er Media”
Note
❒
The paper size in millimeters
is displayed as
"(length
×
width)". For exam-
ple "Load A4(297
×
210)"
means "load A4
K
", and "Load
A4(210
×
297)" means "load
A4
L
".
❒
Depending on the language
you use, only the length may
be displayed. If "Load
A4(297
×
)" is displayed, load
A4
K
.
❒
If there is only one possible
feed direction, depending on
the language you use, the pa-
per size in millimeters may
not be displayed.
Low on Toner The toner bottle is almost
empty.
Prepare a new toner bottle. If the
image density is too light, replace
the old toner bottle with a new
one.
⇒
P.127 “Replacing the Toner
Bottle”
Misfeed:{location}
Open Front Cover
There is a misfeed in the
printer.
Remove the misfed papers from
{location}.
⇒
P.108 “Removing
Misfed Paper”
Open Duplex
Side Tray
The right cover of the du-
plex unit is not open when
making duplex printing on
A3, B4 JIS , 11"
×
17", or
8
1
/
2
"
×
14"
K
size paper.
Open the duplex unit right cover.
Punch Chips Full The punch waste box is full. Remove paper chips.
⇒
P.126
“Removing Paper Chips”
Remove Paper:
Mailbox Proof
The mailbox tray is full. Remove paper from the Mailbox
CS360.
Messages Description Comments
