User Tools (System Settings)
78
4
H Enter the fax number using the
number keys, and then press [OK].
To select the line
A Press [Select Line].
B Select the line, and then press
[OK].
To program the SUB Code
A Press [Adv. Features], and then
select [SUB Code].
B Press [Change] under TX SUB
Code.
C Enter a SUB Code using the
number keys, and then press
[OK].
D To enter a password, press
[Change] under Password
(SID).
E Enter a password using the
number keys, and then press
[OK].
F Press [OK].
To program the SEP Code
A Press [Adv. Features], and then
select [SEP Code].
B Press [Change] under RX SEP
Code.
C Enter a SEP Code using the
number keys, and then press
[OK].
D To enter a password, press
[Change] under Password
(PWD).
E Enter a password using the
number keys, and then press
[OK].
F Press [OK].
To set the International TX mode
A Press [Change] under Interna-
tional TX Mode.
B Select [OFF] or [ON], and then
press [OK].
To select the fax header
Note
r You can register the fax header
name in Program Fax Informa-
tion under the system settings
of Facsimile Features. See Fac-
simile Reference <Advanced Fea-
tures>.
A Press [Change] under Fax Head-
er.
B Select [1st Name] or [2nd Name],
and then press [OK].
To set label insertion
When Label Insertion is set to ON,
the receiver's name and standard
messages are printed on the fax
message when it is received at the
other end.
A Press [Change] under Label In-
sertion.
B Select [ON].
C Press [Change] under Line 2.
