Programs
23
2
Programs
You can store frequently used set-
tings in the machine memory and re-
call them for future use.
Note
r You can store up to 10 programs
for the scanner mode.
r You can use the settings stored in
program No.10 as the initial mode
by selecting [Program No.10] in
[Change Initial Mode] in [Scanner Fea-
tures].
r Programs are not deleted by turn-
ing the power off or by pressing
the {Clear Modes} key. They are de-
leted only when you delete or
overwrite them with another pro-
gram.
r The items which can be stored as a
program are as follows: the scan
settings, 1 sided/2 sided original,
Top to Top/Top to Bottom, Last
Page, Original Feed Type, File
Type, and Batch/SADF.
Storing a Program
A Edit the settings so all functions
you want to store in this program
are selected.
B Make sure the {Scanner} key is se-
lected, press the {Program} key.
C Press [Register].
D Press the program number you
want to use.
Note
r Program numbers with m al-
ready have settings in them.
E Enter the program name with the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
r If it is not necessary to enter the
program name, proceed to step
F
.
F Press [OK].
When the settings are successfully
stored, m appears on the left side
of the registered program number
and the program name appears on
the right side. The display returns
to the initial display after a mo-
ment.
