Faxing
22
2
D Specify a destination.
Note
r If you make a mistake, press the
{Clear/Stop} key, and then enter
the correct number.
Reference
p.36 “Entering a Fax Number”
p.38 “Entering an E-mail Ad-
dress”
p.39 “Using Destination Lists”
p.47 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.47 “Redial”, Facsimile Refer-
ence <Advanced Features>
E When sending the same original
to several destinations (broad-
casting), press [Add] to specify the
destinations.
Note
r You do not have to press [Add]
when adding a destination us-
ing the destination list.
r If you do not want to do a
broadcast transmission, pro-
ceed to step
G
.
F Specify a destination.
Note
r Press to switch the destina-
tion between fax number and e-
mail address.
r If you want to specify another
destination, repeat steps
E
and
F
.
G Press the {Start} key.
Note
r Do not lift the ADF during scan-
ning.
After scanning, the standby dis-
play appears.
-Sending originals using the
exposure glass
A Make sure that Memory TX is se-
lected. If it is not, press [Memory
TX].
B Place the first page of your original
face down on the exposure glass.
C Specify a destination.
D Make the scan settings you re-
quire.
E Press the {Start} key.
The machine starts scanning.
