Accessing User Tools (Facsimile Features)
143
8
v Line Priority Setting
Use this function to specify the line
of usage.
Note
r The display may differ depend-
ing on the line type you have.
v Program Economy Time
Use this function for specifying a
time for transmission when call
charges are low. See p.3 “Sending
at a Specific Time (Send Later)”.
Limitation
r You can program only one
Economy Time.
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
v On Hook Mode Release Time
Use this function to specify a time
to cancel On Hook mode after you
transmit using On Hook dialing.
•1 minute
•3 minutes
•5 minutes
• 10 minutes
v Quick Operation Key
Frequently used functions pro-
grammed as Quick Operation keys
are shown on the menu immedi-
ately after the power is turned on.
The Quick Operation keys can be
programmed with the following
functions:
•Journal
•
TX File Status (Transmission File
Status)
• Print Conf. RX (Print Confiden-
tial Reception)
• Print Memory Lock
•Stored File
• Send Later
•Auto Document
• 2 Sided Original
•Closed Network
• Polling TX (Polling Transmis-
sion)
• Polling RX (Polling Reception)
•Fax Header Print
•Label Insertion
• RX File Status (Reception File
Status)
• Forwarding
•Transfer Request
• Switch RX Mode (Reception
Mode Switch)
• Manual E-mail RX (Manual E-
mail Reception)
• TX Status Report (Transmission
Status Report)
• User TX (User Transmission)
• E-mail TX Results (E-mail
Transmission Results)
Up to three functions can be pro-
grammed into a Quick Operation
keys.
A Select Quick Operation key
you want to program.
B Select the function you want to
program in the Quick Opera-
tion key
Note
r
Functions that appear dimmed
have already been set.
