75
7. Using SmartNetMonitor for
Admin
SmartNetMonitor for Admin
Using SmartNetMonitor for Admin, not only can you monitor the status of net-
work printers, but you can also change the configuration of the network inter-
face board using TCP/IP or IPX/SPX protocol.
❖
❖❖
❖ Protocol Stack
❖
❖❖
❖ What can it do?
• Limits settings done from the control panel, and disables changes made to
certain items.
• Enables selection of paper type loaded in the machine.
• Switches to, and comes out of Energy Saver mode.
• Checks information about printing, paper quantity, etc.
• Simultaneously monitors multiple printers. When there are many printers,
you can create groups and classify printers to facilitate management.
• Checks the machine's network settings and detailed device information.
• Enables you to change the machine's network settings.
• You can check details of print jobs sent from a computer.
• Allows you to check job histories of printed, faxed (LAN-Fax), scanned,
and photocopied documents identified by user codes.
Operating system Protocol stack
Microsoft Windows 95/98/Me TCP/IP provided with Windows 95/98/Me
IPX/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows
95/98/Me
Novell Client for Windows 95/98/Me
Microsoft Windows 2000 TCP/IP provided with Windows 2000
IPX/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000/XP
Microsoft Windows XP TCP/IP provided with Windows XP
IPX/SPX provided with Windows XP
Novell Client for Windows NT/2000/XP
Microsoft Windows NT 4.0 TCP/IP provided with Windows NT
IPX/SPX provided with Windows NT
Client Service for NetWare provided with Windows NT
Novell Client for Windows NT/2000/XP
