Key Operator Setting
182
9
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Transfer Report].
E Specify the fax number.
Programming a G3 Fax Number
A Press [G3 Fax No.(Dir.)].
B Enter your facsimile number
using the number keys, and
then press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key.
F Press [Exit].
G Press the {User Tools/Counter} key.
The standby display appears.
Programming a Confidential ID
Program a Confidential ID to print a
Confidential Reception. See p.36
“Printing a Confidential Message”.
Note
r If you do not program a Confiden-
tial ID, you cannot receive a Confi-
dential Transmission.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Program Confidential ID].
E Enter an ID using the number
keys, and then press [OK].
Note
r A Confidential ID can be any
four-digit number, except 0000.
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
To cancel programming an ID,
press [Cancel]. The display returns
to that of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.
