User Tools Menu (System Settings)
35
3
❖
❖❖
❖ Gateway Address
A gateway is a connection or inter-
change point between two net-
works. Configure the gateway
address for the router or host com-
puter used as a gateway.
• Gateway Address:000.000.000.000
Note
❒ Default: 000.000.000.000
❖
❖❖
❖ DNS Configuration
Make settings for the DNS server.
• Auto-Obtain (DHCP)
• Specify
When you select [Specify], enter
the [DNS Server] IP address as
“xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
• DNS Server 1:000.000.000.000
• DNS Server 2:000.000.000.000
• DNS Server 3:000.000.000.000
Note
❒ Default: Auto-Obtain (DHCP)
❖
❖❖
❖ WINS Configuration
You can specify the WINS server
settings.
• ON
If [ON] is selected, enter the
[WINS Server] IP address as
“xxx.xxx.xxx.xxx”(“x” indi-
cates a number).
If DHCP is in use, specify the
[Scope ID].
• WINS Server:000.000.000.000
• Scope ID
• OFF
Limitation
❒ Enter a [Scope ID] using up to 31
alphanumeric characters.
Note
❒ Default: OFF
❖
❖❖
❖ NW Frame Type
Select the frame type when you
use NetWare.
• Auto Select
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
Note
❒ Default: Auto Select
❖
❖❖
❖ LAN Type
When you have installed the IEEE
802.11b (wireless LAN) board (op-
tional), select interface, IEEE
802.11b (wireless LAN) or Ether-
net.
• Ethernet
• IEEE 802.11b
Note
❒ Default: Ethernet
❒ Appears when the IEEE 802.11b
(wireless LAN) board is in-
stalled.
❒ If Ethernet and IEEE 802.11b
(wireless LAN) are both con-
nected to the machine, the select-
ed interface takes precedence.
❖
❖❖
❖ Ethernet Speed
Set the access speed for networks.
Select a speed that matches your
network environment. [Auto Select]
should usually be selected.
• Auto Select
• 100Mbps Fixed
• 10Mbps Fixed
Note
❒ Default: Auto Select
