User Tools (System Settings)
88
4
Changing a registered SMB folder
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Key Operator Tools], and then
press [TNext].
D Press [Address Book Management].
E Select the user of the registered
folder you want to change.
Press the user (destination) key, or
enter the registered number using
the number keys.
Note
r If you press , you can search
for a user by user name/index,
user code, fax destination, or e-
mail address.
F Press [Folder].
G Select the items you want to
change.
To change the protocol
A Press [FTP].
B A confirmation message ap-
pears. Press [Yes].
Note
r Changing the protocol will
clear all settings made under
the previous protocol.
C Enter each item again.
Reference
See steps I to T on p.89 “To
register an FTP folder”.
Changing items under SMB
A Press [Change] under Path.
B Enter the new path where the
folder is located, and then
press [OK].
Note
r You can also use Browse Net-
work to specify a new folder.
For details, see p.87 “Using
Browse Network to locate
the folder”.
C Press [Change] under User
Name.
D Enter the new user name, and
then press [OK].
This is a user name which is au-
thorized to access the folder.
E Press [Change] under Password.
F Enter the new password, and
then press [OK].
H Press [Connection Test] to check the
path is set correctly.
I Press [Exit].
Note
r If the connection test fails, check
the settings, and then try again.
J Press [OK].
Note
r To change the user (destination)
name, see p.72 “Changing a
User Code”.
