Using Key Operator Settings
159
9
User Parameters
User Parameters allow you to customize various settings to suit your needs.
To change function settings, set the User Parameter Switches.
Preparation
Access to some User Parameter Settings requires installation of optional
equipment, or that other settings be made beforehand.
v Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are “0”or “1”. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between “0”and“1”.
v User Parameter List
User Parameter Switches are outlined below.
Switch 02
00111011
↓↓↓↓↓↓↓↓
76543210
Switch Bit Item 0 1
02 0 Forwarding Mark Off On
3TSI Print Off On
03 0 Automatic printing of the
Memory Transmission Result
Report
Off On
2 Automatic printing of the
Memory Storage Report
Off On
3
Automatic printing of the Poll-
ing Reception Reserve Report
Off On
4
Automatic printing of the Poll-
ing Reception Result Report
Off On
5 Automatic printing of the Im-
mediate Transmission Result
Report
Off On
6
Automatic printing of the Poll-
ing Transmission Clear Report
Off On
7 Automatic printing of the
Journal
Off On
04 0 Automatic printing of the
Confidential File Report
Off On
7 Include a portion of the image
on reports
Off On
