Key Operator Setting
152
9
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Store/Change/Delete Auto Doc-
ument].
E Press [Delete], and then select the
file you want to delete.
F Press [Delete].
Note
r To cancel deleting, press [Do not
Delete]. The display returns to
that of step
E
.
G Press [Exit].
H Press the {User Tools/Counter} key.
The standby display appears.
Programming, Changing and
Deleting a Scan Size
When you select a scan size to scan a
non-standard size original, two cus-
tom sizes are available (Program Size
1 and Program Size 2). Use these func-
tions to program a custom size in ad-
vance.
To change an existing scan size, just
use the same procedure.
Important
r When programming or changing a
scan size, we recommend you
make a record of the new size.
Note
r You can program up to two sizes.
r You can specify a horizontal length
from 128 to 1,200 mm, or from 5.5
to 47 inches.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Program/Change/Delete Scan
Size].
