Faxing
36
2
Specifying a Destination
You can specify the destination using
one of three methods.
v Fax number
p.36 “Entering a Fax Number”
v E-mail address
p.38 “Entering an E-mail Address”
v Destination list
p.39 “Using Destination Lists”
This section covers these functions
and others in more detail.
Note
r The display shows the percentage
of free memory space for storing
originals. Since fax numbers and e-
mail addresses are programmed in
separate memory, dialing fax
numbers using the number keys
does not change the percentage on
the display.
Entering a Fax Number
Enter numbers directly using the key
pad on the right side of the control
panel.
Note
r Maximum length of a fax number:
128 digits.
r You can insert pauses and tones in
a fax number. See p.37 “Pause”,
p.37 “Tone”.
A Enter the fax number using the
number keys.
Note
r If you make a mistake, press the
{Clear/Stop} key, and then enter
again.
r If the optional extra G3 interface
unit is installed, select G3 before
you proceed to the next step.
See p.59 “Changing the Line
Port”, Facsimile Reference <Ad-
vanced Features> .
r Press [ProgDest] after entering
the fax number to store the fax
number in the destination list.
