Key Operator Setting
158
9
ECM
If part of a transmission fails because
of a line problem, the lost data is auto-
matically resent. For this function to
work, the other machine must have
ECM. You can turn this function on or
off through the following procedure.
Note
r If you turn ECM off, you cannot
use the following functions:
• JBIG Transmission
• Super G3 Communication
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [ECM].
E Select [ON] or [OFF], and then
press [OK].
Note
r To cancel this setting, press
[Cancel]. The display returns to
that of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.
