Using Key Operator Settings
169
9
I Press [OK].
A Special Sender has been pro-
grammed.
Note
r To program another sender, re-
peat the procedure from step
E
.
J Press [Exit].
K Press the {User Tools/Counter} key.
The standby display appears.
Programming Initial Set Up of a Special
Sender
Use this function to program “Initial
Set Up” of a Special Sender. You can
also specify the Bypass Tray Paper
Size.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Program Special Sender].
E Press [Initial Set Up].
F Select the function you want to
program.
Note
r In this feature, “Authorized
RX” has the same settings as
“Reception Settings”. See p.144
“Reception Settings”.
Programming Authorized RX and
Special RX Function
A Select [Authorized RX] or [Special
RX Function].
B Select [ON] or [OFF], and then
press [OK].
The illustration shows the “Au-
thorized RX” display as an ex-
ample.
