73
5. Troubleshooting
Adjusting the Volume
You can change the volume of the fol-
lowing sounds that the machine
makes.
v On Hook Mode
Heard when the {On Hook Dial} key
is pressed.
v At Transmission
Heard when the machine sends a
message.
v At Reception
Heard when the machine receives
a message.
v At Dialing
Heard after pressing the {Start}
key, until the line connects to the
destination.
v At Printing
Heard when a received message is
printed. See p.96 “Print Comple-
tion Beep”, Facsimile Reference <Ad-
vanced Features> .
Note
r You can adjust the On Hook vol-
ume when you press the {On Hook
Dial} key. See p.56 “On Hook Dial”,
Facsimile Reference <Advanced Fea-
tures> .
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Adjust Sound Volume].
D Press [Lower] or [Louder] for each
item, and then press [OK].
Note
r You can hear the actual volume
by pressing [Check].
r If you press [Cancel], the volume
setting is canceled. The display
returns to that of step
C
.
E Press the {User Tools/Counter} key.
The standby display appears.
