Key Operator Setting
184
9
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
To cancel programming an ID,
press [Cancel]. The display returns
to that of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.
Selecting Dial/Push Phone
Use this function to select a line type
when the machine is connected to a
G3 analog line.
Dial and Push lines are available for
selection.
Note
r When the optional G3 expansion
unit is installed, “G3-2” and “G3-
3” appear.
r This function is not available in
some areas.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Select Dial/Push Phone].
E Press [Push Button Phone] or [Dial
Phone (10PPS)] to select the line,
and then press [OK].
Reference
p.193 “Selecting the Line Type”
F Press the {User Tools/Counter} key.
The standby display appears.
Storing or Printing Received
Documents
The optional printer/scanner unit is re-
quired.
Specify whether received documents
are to be saved on the hard disk or
printed immediately without being
saved. You can print stored docu-
ments repeatedly or download them
as images to a computer using a Web
browser or DeskTopBinder V2 Lite. If
you select printing without saving,
documents are printed each time they
are received.
Limitation
r If using System Settings you have
set the machine to distribute re-
ceived faxes to the delivery server,
the documents cannot be saved on
the hard disk.
