Key Operator Setting
180
9
Programming a password
If you do not want to program a
password, proceed to step
J
.
A Press [Password].
B Enter a password, and then
press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
C Re-enter the password, and
then press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
r If you want to change the
password after pressing [OK],
press [Change], and then per-
form from step B.
D Press [OK].
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
The standby display appears.
Deleting Transfer Boxes
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Box Setting].
E Press [Delete], and then select the
box you want to delete.
With a programmed password
A Enter a password using the
number keys, and then press
[OK].
