Faxing
24
2
Canceling a Memory Transmission
Even when fax number and e-mail
address are simultaneously specified,
or only e-mail address is specified,
you can cancel the mode using the
same procedure. However, you can-
not cancel the transmission of an In-
ternet Fax document being sent.
Before the Original Is Scanned
Use this procedure to cancel a trans-
mission before pressing the {Start}
key.
A Press the {Clear Modes} key.
Note
r When documents are placed in
the ADF, you can cancel trans-
mission simply by removing
them.
While the Original Is Being
Scanned
Use this procedure to cancel a trans-
mission after pressing the {Start} key.
A Press the {Clear/Stop} key.
The machine stops scanning.
Note
r You can also cancel scanning by
pressing [Stop Scanning].
r Scanning may be completed
while you are performing the
cancel operation.
While the Original Is Being
Transmitted
Note
r If the transmission finishes while
you are carrying out this proce-
dure, it will not be canceled.
r If you cancel a message while it is
being sent, the transmission is halt-
ed as soon as you finish the cancel-
lation procedure. However, some
pages of your message may have
already been sent and received at
the other end.
A Press the {Clear/Stop} key.
Note
r You can also cancel a Memory
Transmission by pressing
[Change/Stop TX File].
