D-Link DES-3200 Series Washer/Dryer User Manual


 
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
639
conflict with static FDB <ipaddr>, MAC: <macaddr>, Port <portNum>)
Dynamic IMPB entry conflicts
with static IMPB
Dynamic IMPB entry conflicts with static
IMPB(IP: <ipaddr>, MAC: <macaddr>, Port
<portNum>)
Warning
Creating IMPB entry failed
due to no ACL rule available
Creating IMPB entry failed due to no ACL rule
being available(IP:<ipaddr>, MAC: <macaddr>,
Port <portNum>)
Warning
IP and Password
Changed
IP Address change activity
Management IP address was changed by
(Username: <username>,IP:<ipaddr>)
Informational
Password change activity
Password was changed by (Username:
<username>,IP:<ipaddr> )
Informational
Safeguard
Engine
Safeguard Engine is in
normal mode
Safeguard Engine enters NORMAL mode Informational
Safeguard Engine is in
filtering packet mode
Safeguard Engine enters EXHAUSTED mode Warning
Packet Storm Broadcast strom occurrence Port <portNum> Broadcast storm is occurring Warning
Broadcast storm cleared Port <portNum> Broadcast storm has cleared Informational
Multicast storm occurrence Port <portNum> Multicast storm is occurring Warning
Multicast storm cleared Port <portNum> Multicast storm has cleared Informational
Port shut down due to a
packet storm
Port <portNum> is currently shut down due to a
packet storm
Warning
Loop Back
Dection
Port loop occurred
Port <portNum> LBD loop occurred. Port
blocked.
Critical
Port loop detection restarted
after interval time
Port <portNum> LBD port recovered. Loop
detection restarted.
Informational
Port with VID loop occurred
Port <portNum> VID <vlanID> LBD loop
occurred. Packet discard begun.
Critical
Port with VID Loop detection
restarted after interval time
Port <portNum> VID <vlanID> LBD recovered.
Loop detection restarted.
Informational
802.1x
VID assigned from radius
server after radius client
authenticated by radius
server successfully .This VID
will assign to the port and
this port will be the vlan
untag port member.
Radius server <ipaddr> assigned vid :<vlanID>
to port <portNum> (account :<username> )
Informational
Ingress bandwidth assigned
from radius server after
radius client authenticated by
radius server
successfully .This Ingress
bandwidth will assign to the
port.
Radius server <ipaddr> assigned ingress
bandwith :<ingressBandwidth> to port
<portNum> (account : <username>)
Informational
Egress bandwidth assigned
from radius server after
radius client authenticated by
radius server
successfully .This egress
bandwidth will assign to the
port.
Radius server <ipaddr> assigned egress
bandwith :<egressBandwidth> to port
<portNum> (account: <username>)
Informational
802.1p default priority
assigned from radius server
Radius server <ipaddr> assigned 802.1p
deafult priority:<priority> to port <portNum>
Informational