Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
341
DES-3200-28/ME:admin#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DES-3200-28/ME:admin#
36-5 show link_aggregation
Description
This command is used to display the current link aggregation configuration on the Switch.
Format
show link_aggregation {group_id <value> | algorithm}
Parameters
group_id - (Optional) Specify the group id. The group number identifies each of the groups.
<value > - Enter the group ID value here.
algorithm - (Optional) Allows you to specify the display of link aggregation by the algorithm in
use by that group.
If no parameter specified, system will display all link aggregation information.
Restrictions
None.
Example
Link aggregation group enable:
DES-3200-28/ME:admin#show link_aggregation
Command: show link_aggregation
Link Aggregation Algorithm = MAC-Source-Dest
Group ID : 1
Type : LACP
Master Port : 5
Member Port : 5-7
Active Port :
Status : Enabled
Flooding Port : 7
Total Entries : 1
DES-3200-28/ME:admin#
Link aggregation group enable and no member linkup: