Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
592
long.
src_file - (Optional) Used to identify the parameter “path_filename”.
<pathname 64> - The pathname specifies an absolute pathname on the device file
system.
include - (Optional) Specify to include lines that contain the specified filter string.
exclude - (Optional) Specify to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specify to include lines that contain the specified filter string.
exclude - (Optional) Specify to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
include - (Optional) Specify to include lines that contain the specified filter string.
exclude - (Optional) Specify to exclude lines that contain the specified filter string.
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
<filter_string 80> - A filter string is enclosed by symbol. Thus, the filter string itself cannot
contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80
characters long.
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string
itself cannot contain the character. The filter string is case sensitive. This string can be
up to 80 characters long.
log_toTFTP - Specify to upload a log file from device to TFTP server.
<ipaddr> - The IP address of the TFTP server.
dest_file - Used to identify the parameter “path_filename”.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.
attack_log_toTFTP – Specify that the attack log will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
dest_file - Used to identify the parameter “path_filename”.
<path_filename 64> - Specify the path name on the TFTP server to hold the attack log.
This name can be up to 64 characters long.
firmware_toTFTP – Specify that the firmware file will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
dest_file - Used to identify the parameter “path_filename”.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters
long.