Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
302
DES-3200-28/ME:admin#config mld_snooping static_group vlan default FF1E::1
delete
9-10
Command: config mld_snooping static_group vlan default FF1E::1 delete 9-10
Success.
DES-3200-28/ME:admin#
30-37 show mld_snooping static_group
Description
This command used to display the MLD snooping multicast group static members.
Format
show mld_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipv6addr>}
Parameters
vlan - (Optional) Specify the name of the VLAN on which the static group resides.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters
long.
vlanid - (Optional) Specify the ID of the VLAN on which the static group resides.
<vlanid_list> - Enter the VLAN ID list here.
<ipv6addr> - (Optional) Specify the multicast group IPv6 address.
Restrictions
None.
Example
To display all the MLD snooping static groups:
DES-3200-28/ME:admin#show mld_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / Default FF1E ::1 9-10
Total Entries : 1
DES-3200-28/ME:admin#
30-38 config mld_snooping data_driven_learning
Description
This command is used to enable or disable the data-driven learning of an MLD snooping group.
When data-driven learning is enabled for the VLAN, when the Switch receives the IP multicast
traffic, on this VLAN, an MLD snooping group will be created. That is, the learning of an entry is
not activated by MLD membership registration, but activated by the traffic. For an ordinary MLD