Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
413
Chapter 45
Multicast VLAN Command
List
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority [<value
0-7> | none] {replace_priority}}
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port <portlist> |
[source_port <portlist> | untag_source_port <portlist>] | tag_member_port <portlist>] | state
[enable|disable] | replace_source_ip <ipaddr> | remap_priority [<value 0-7> | none]
{replace_priority}}
create igmp_snooping multicast_vlan_group_profile <profile_name 1-32>
config igmp_snooping multicast_vlan_group_profile <profile_name 1-32> [add | delete]
<mcast_address_list>
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
show igmp_snooping multicast_vlan_group_profile {< profile_name 1-32>}
config igmp_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name
<profile_name 1-32>
show igmp_snooping multicast_vlan_group {<vlan_name 32>}
delete igmp_snooping multicast_vlan <vlan_name 32>
enable igmp_snooping multicast_vlan
disable igmp_snooping multicast_vlan
config igmp_snooping multicast_vlan forward_unmatched [enable | disable]
show igmp_snooping multicast_vlan {<vlan_name 32>}
45-1 create igmp_snooping multicast_vlan
Description
This command is used to create a multicast VLAN and implements relevant parameters as
specified. More than one multicast VLANs can be configured. The maximum number of
configurable VLANs is 5.
Newly created IGMP snooping multicast VLANs must use a unique VLAN ID and name, i.e. they
cannot use the VLAN ID or name of any existing 802.1q VLAN.
Also keep in mind the following conditions:
Multicast VLANs cannot be configured or displayed using 802.1Q VLAN commands.
An IP interface cannot be bound to a multicast VLAN.
The multicast VLAN snooping function co-exists with the 802.1q VLAN snooping function.
Format
create igmp_snooping multicast_vlan <vlan_name 32> <vlanid 2-4094> {remap_priority
[<value 0-7> | none] {replace_priority}}
Parameters
<vlan_name 32> - Enter the multicast VLAN here. The VLAN name can be up to 32 characters
long.