Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
591
DES-3200-28/ME:admin#download firmware_fromTFTP 10.54.71.1 src_file px.had
Command: download firmware_fromTFTP 10.54.71.1 src_file px.had
Connecting to server................... Done.
Download firmware...................... Done. Do not power off!
Please wait, programming flash......... Done.
DES-3200-28/ME:admin#
To download configuration from TFTP:
DES-3200-28/ME:admin#download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Command: download cfg_fromTFTP 10.54.71.1 src_file cfg01.txt
Connecting to server.................…. Done.
Download configuration................. Done.
DES-3200-28/ME:admin#
69-2 upload
Description
This command is used to upload firmware and configuration from device to TFTP/FTP server.
Format
upload [cfg_toTFTP {<ipaddr> dest_file <path_filename 64> {src_file <pathname 64>}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include
| exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include |
exclude | begin ] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}}} |
log_toTFTP{ <ipaddr> dest_file <path_filename 64>} | attack_log_toTFTP{ <ipaddr> dest_file
<path_filename 64>} | firmware_toTFTP{ <ipaddr> dest_file <path_filename 64> {src_file
<path_filename 64>}} | cfg_toFTP [<ipaddr> {tcp_port < tcp_port_number 1-65535>}
dest_file <path_filename 64> | ftp: <string user:password@ipaddr:tcpport/path_filename>]
{src_file<path_filename 64>} {[include | exclude | begin] <filter_string 80> {<filter_string 80>
{<filter_string 80>}} {[include | exclude | begin ] <filter_string 80> {<filter_string 80>
{<filter_string 80>} } {[include | exclude | begin ] <filter_string 80> {<filter_string 80>
{<filter_string 80>}}}}} | log_toFTP [<ipaddr> {tcp_port < tcp_port_number 1-65535>}
dest_file <path_filename 64> | ftp: <string user:password@ipaddr:tcpport/path_filename>] |
attack_log_toFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} dest_file
<path_filename 64> | ftp: <string user:password@ipaddr:tcpport/path_filename>] |
firmware_toFTP [<ipaddr> {tcp_port <tcp_port_number 1-65535>} dest_file <path_filename
64> | ftp: <string user:password@ipaddr:tcpport/path_filename>] {src_file <pathname 64>}]
Parameters
cfg_toTFTP – Specify that the configuration file will be uploaded to the TFTP server.
<ipaddr> - The IP address of the TFTP server.
dest_file - Used to identify the parameter “path_filename”.
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can
be a relative pathname or an absolute pathname. This name can be up to 64 characters