Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
270
30-4 config igmp access_authentication ports
Description
This command is used to enable or disable the IGMP Access Control function for the specified
ports. If the IGMP Access Control function is enabled and the Switch receives an IGMP JOIN
message, the Switch will send the access request to the RADIUS server for authentication.
Format
config igmp access_authentication ports [all | <portlist>] state [enable | disable]
Parameters
all - Specify all ports to be configured.
<portlist> - Specify a range of ports to be configured.
state - Specify the state of the RADIUS authentication function on the specified ports.
enable - Enable the RADIUS authentication function on the specified ports.
disable - Disable the RADIUS authentication function on the specified ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP Access Control for all ports:
DES-3200-28/ME:admin#config igmp access_authentication ports all state enable
Command: config igmp access_authentication ports all state enable
Success.
DES-3200-28/ME:admin#
30-5 config router_ports
Description
This command is used to designate a range of ports as being connected to multicast-enabled
routers. This will ensure that all packets with such a router as its destination will reach the
multicast-enabled router, regardless of protocol, etc.
Format
config router_ports [<vlan_name 32> | vlanid <vlanid_list> ] [add | delete] <portlist>
Parameters
<vlan_name 32> - Specify the name of the VLAN on which the router port resides.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID here.
add - Specify to add the router ports.