Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
484
Parameters
group_id - Specify the group ID to be deleted.
<id> - Enter the group ID used here.
group_name - Specify the name of the group to be deleted.
<name 32> - Enter the group name here. This name can be up to 32 characters long.
all - Specify that all the protocol group will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete protocol group 100:
DES-3200-28/ME:admin#delete dot1v_protocol_group group_id 100
Command: delete dot1v_protocol_group group_id 100
Success.
DES-3200-28/ME:admin#
55-4 show dot1v_protocol_group
Description
This command is used to display the protocols defined in a protocol group.
Format
show dot1v_protocol_group {[group_id <id> | group_name <name 32>]}
Parameters
group_id - (Optional) Specify the ID of the group to be displayed.
<id> - Enter the group ID used here.
group_name - (Optional) Specify the name of the protocol group to be displayed.
<name 32> - Enter the group name here. This name can be up to 32 characters long.
If no group ID is not specified, all the configured protocol groups will be displayed.
Restrictions
None.
Example
To display the protocol group ID 10: