Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
285
all - Specify all VLANs on which the router port resides.
static - (Optional) Displays router ports that have been statically configured.
dynamic - (Optional) Displays router ports that have been dynamically configured.
forbidden - (Optional) Displays forbidden router ports that have been statically configured.
If no parameter is specified, the system will display all currently configured router ports on the
Switch.
Restrictions
None.
Example
To display router ports:
DES-3200-28/ME:admin#show router_ports all
Command: show router_ports all
VLAN Name : default
Static Router Port : 1-10
Dynamic Router Port :
Router IP : 10.0.0.1, 10.0.0.2, 10.0.0.3
Forbidden router port :
VLAN Name : vlan2
Static router port :
Dynamic router port : 13
Router IP : 10.0.0.4, 10.0.0.5, 10.0.0.6
Forbidden router port :
Total Entries : 2
DES-3200-28/ME:admin#
30-21 show igmp_snooping statistics counter
Description
This command is used to display the statistics counter for IGMP protocol packets that are received
by the Switch since IGMP snooping was enabled.
Format
show igmp_snooping statistic counter [vlan <vlan_name> | vlanid <vlanid_list> | ports
<portlist>]
Parameters
vlan - Specify a VLAN to be displayed.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify a list of VLANs to be displayed.
<vlanid_list> - Enter the VLAN ID list here.
ports - Specify a list of ports to be displayed.