Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
418
Parameters
<profile_name 1-32> - (Optional) Enter the multicast VLAN group profile name here. The name
can be up to 32 characters long.
Restrictions
None.
Example
To display all IGMP snooping multicast VLAN profiles:
DES-3200-28/ME:admin#show igmp_snooping multicast_vlan_group_profile
Command: show igmp_snooping multicast_vlan_group_profile
Profile Name Multicast Addresses
--------------------- --------------------------------
MOD 234.1.1.1 - 238.244.244.244
239.1.1.1 - 239.2.2.2
Customer 224.19.62.34 - 224.19.162.200
Total Entries : 2
DES-3200-28/ME:admin#
45-7 config igmp_snooping multicast_vlan_group
Description
This command is used to configure the multicast group learned with the specific multicast VLAN.
The following two cases can be considered for examples:
Case 1- The multicast group is not configured, multicast VLANs do not have any member ports
overlapping and the join packet received by the member port is learned on only the multicast
VLAN that this port is a member of.
Case 2-,The join packet is learned with the multicast VLAN that contains the destination multicast
group. If the destination multicast group of the join packet cannot be classified into any multicast
VLAN to which this port belongs, then the join packet will be learned on the natural VLAN of the
packet.
Note that a profile cannot overlap in different multicast VLANs. Multiple profiles can be added to a
multicast VLAN.
Format
config igmp_snooping multicast_vlan_group <vlan_name 32> [add | delete] profile_name
<profile_name 1-32>