Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
17
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To display greeting message:
:admin#show greeting_message
Command: show greeting_message
===============================================================================
=
Fast Ethernet Switch
Command Line Interface
Firmware: Build 4.04.004
Copyright(C) 2012 D-Link Corporation. All rights reserved.
===============================================================================
=
:admin#
2-14 config command_prompt
Description
This command is used to modify the command prompt.
The current command prompt consists of four parts: “product name” + “:” + ”user level” + ”#” (e.g.
“:admin#”). This command is used to modify the first part (1. “product name”) with a string
consisting of a maximum of 16 characters, or to be replaced with the users’ login user name.
When users issue the “reset” command, the current command prompt will remain in tact. Yet,
issuing the “reset system” will return the command prompt to its original factory default value.
Format
config command_prompt [<string 16> | username | default]
Parameters
<string 16> - Enter the new command prompt string of no more than 16 characters.
username - Enter this command to set the login username as the command prompt.
default - Enter this command to return the command prompt to its original factory default value.
Restrictions
Only Administrator and Operator-level users can issue this command.