Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
377
40-5 config mac_based_access_control guest_vlan
Description
This command is used to assign a specified port list to the MAC-based Access Control guest
VLAN. Ports that are not contained in port list will be removed from the MAC-based Access
Control guest VLAN.
For detailed information on the operation of MAC-based Access Control guest VLANs, please see
the description for the “config mac_based_access_control ports” command.
Format
config mac_based_access_control guest_vlan ports <portlist>
Parameters
ports - Specify MAC-based Access Control guest VLAN membership.
<portlist> - Enter the list of port used for this configuration here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control guest VLAN membership:
DES-3200-28/ME:admin#config mac_based_access_control guest_vlan ports 1-8
Command: config mac_based_access_control guest_vlan ports 1-8
Success.
DES-3200-28/ME:admin#
40-6 config mac_based_access_control ports
Description
This command is used to configure MAC-based Access Control port’s setting.
When the MAC-based Access Control function is enabled for a port and the port is not a MAC-
based Access Control guest VLAN member, the user who is attached to this port will not be
forwarded unless the user passes the authentication.
A user that does not pass the authentication will not be serviced by the Switch.
If the user passes the authentication, the user will be able to forward traffic operated under
the assigned VLAN.
When the MAC-based Access Control function is enabled for a port, and the port is a MAC-based
Access Control guest VLAN member, the port(s) will be removed from the original VLAN(s)
member ports, and added to MAC-based Access Control guest VLAN member ports.