Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
349
mgt_addr - Specify the management address used.
ipv4 - Specify the IPv4 address used.
<ipaddr> - Enter the IP address used for this configuration here.
ipv6 - Specify the IPv6 address used.
<ipv6addr> - Enter the IPv6 address used for this configuration here.
enable - Specify that the advertising indicated management address instance will be enabled.
disable - Specify that the advertising indicated management address instance will be
disabled.
basic_tlvs - Specify the basic TLV data types used from outbound LLDP advertisements.
all - (Optional) Specify that all the basic TLV data types will be used.
port_description - (Optional) This TLV optional data type indicates that LLDP agent should
transmit 'Port Description TLV on the port. The default state is disabled.
system_name - (Optional) This TLV optional data type includes indicates that LLDP agent
should transmit 'System Name TLV'. The default state is disabled.
system_description - (Optional) This TLV optional data type includes indicates that LLDP
agent should transmit 'System Description TLV'. The default state is disabled.
system_capabilities - (Optional) This TLV optional data type includes indicates that LLDP
agent should transmit 'System Capabilities TLV'. The system capability will indicate
whether the device provides repeater, bridge, or router function, and whether the provided
functions are currently enabled. The default state is disabled.
enable - Specify that the basic TLV data types used from outbound LLDP advertisements will
be enabled.
disable - Specify that the basic TLV data types used from outbound LLDP advertisements will
be disabled.
dot1_tlv_pvid - This TLV optional data type determines whether the IEEE 802.1 organizationally
defined port VLAN ID TLV transmission is allowed on a given LLDP transmission capable port.
The default state is disable.
enable - Specify that the Dot1 TLV PVID option will be enabled.
disable - Specify that the Dot1 TLV PVID option will be disabled.
dot1_tlv_protocol_vid - This TLV optional data type determines whether the IEEE 802.1
organizationally defined port and protocol VLAN ID TLV transmission is allowed on a given
LLDP transmission capable port. The default state is disable.
vlan - Specify the VLAN used for this configuration.
all - Specify that all the configured VLANs will be used for this configuration.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32
characters long.
vlanid - Specify the VLAN ID used for this configuration.
<vlanid_list> - Enter the ID of the VLAN here.
enable - Specify that the Dot1 TLV protocol VID will be enabled.
disable - Specify that the Dot1 TLV protocol VID will be disabled.
dot1_tlv_vlan_name - This TLV optional data type indicates whether the corresponding Local
System’s VLAN name instance will be transmitted on the port. If a port is associated with
multiple VLANs. those enabled VLAN ID will be advertised. The default state is disable.
vlan - Specify the VLAN used for this configuration.
all - Specify that all the configured VLANs will be used for this configuration.
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32
characters long.
vlanid - Specify the VLAN ID used for this configuration.
<vlanid_list> - Enter the ID of the VLAN here.
enable - Specify that the Dot1 TLV VLAN name will be enabled.
disable - Specify that the Dot1 TLV VLAN name will be disabled.
dot1_tlv_protocol_identity - This TLV optional data type indicates whether the corresponding
Local System's Protocol Identity instance will be transmitted on the port. The Protocol Identity
TLV provides a way for stations to advertise protocols that are important to the operation of
the network. Such as Spanning Tree Protocol, the Link Aggregation Control Protocol, and
numerous vendor proprietary variations are responsible for maintaining the topology and
connectivity of the network. If EAPOL, GVRP, STP (including MSTP), and LACP protocol
identity is enabled on this port and it is enabled to be advertised, then this protocol identity will
be advertised. The default state is disabled.
all - Specify that all the vendor proprietary protocols will be advertised.