Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
457
Chapter 50
Peripherals Command List
show device_status
show environment
config temperature threshold {high <temperature -500-500> | low <temperature -500-500>}
config temperature [trap | log] state [enable | disable]
config external_alarm channel <value 1-2> message <sentence 1-128>
show external_alarm
50-1 show device_status
Description
This command is used to display the current status of the power and fan(s) on the system.
Within fan(s) status display, for example, there are three fans on the left of the Switch, if three fans
is working normally, there will display “OK” in the Left Fan field. If some fans work failed, such as
fan 1,3 , there will only display the failed fans in the Left Fan field, such as “1,3 Fail”.
In the same way, the Right Fan, Back Fan is same to Left Fan. Because there is only one CPU
Fan, if it is working failed, display “Fail”, otherwise display “OK”.
Format
show device_status
Parameters
None.
Restrictions
User Level.
Example
To show device status:
DES-3200-28/ME:admin#show device_status
Command: show device_status
Internal Power: Fail
External Power: Active
Right Fan : OK
DES-3200-28/ME:admin#