Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
158
Format
config cfm ports <portlist> state [enable | disable]
Parameters
<portlist> - Enter the list of ports used for this configuration.
state - Specify that the the CFM function will be enabled or disabled.
enable - Specify that the CFM function will be enabled.
disable - Specify that the CFM function will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the CFM ports:
DES-3200-28/ME:admin#config cfm ports 2-5 state enable
Command: config cfm ports 2-5 state enable
Success.
DES-3200-28/ME:admin#
16-13 show cfm ports
Description
This command is used to show the CFM state of specified ports.
Format
show cfm ports <portlist>
Parameters
<portlist> - Enter the list of logical ports.
Restrictions
None.
Example
To show the CFM ports: