Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
119
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable HTTP:
DES-3200-28/ME:admin#disable web
Command: disable web
Success.
DES-3200-28/ME:admin#
10-10 reboot
Description
This command is used to restart the Switch.
Format
reboot {force_agree}
Parameters
force_agree - (Optional) When force_agree is specified, the reboot command will be executed
immediatedly without further confirmation.
Restrictions
Only Administrator-level users can issue this command.
Example
To reboot the Switch:
DES-3200-28/ME:admin#reboot
Command: reboot
Are you sure to proceed with the system reboot?(y/n)
Please wait, the switch is rebooting…
10-11 reset
Description
This command is used to provide reset functions. The configuration setting will be reset to the
default setting by the “reset config” command. For the “reset system” command, the device will
store the reset setting in the NVRAM and then reboot the system. The “reset” command will not
reset IP address, log, user accounts and banner configured on the system.