Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
276
Restrictions
None.
Example
To display all the IGMP snooping static groups:
DES-3200-28/ME:admin#show igmp_snooping static_group
VLAN ID/Name IP Address Static Member Ports
-------------- ------------------ ------------------------
1 / Default 239.1.1.1 9-10
Total Entries : 1
DES-3200-28/ME:admin#
30-13 config igmp_snooping data_driven_learning
Description
This command is used to enable or disable the data driven learning of an IGMP snooping group.
When data-driven learning is enabled for the VLAN, when the Switch receives the IP multicast
traffic on this VLAN, an IGMP snooping group will be created. That is, the learning of an entry is
not activated by IGMP membership registration, but activated by the traffic. For an ordinary IGMP
snooping entry, the IGMP protocol will take care of the aging out of the entry. For a data-driven
entry, the entry can be specified not to be aged out or to be aged out by the aged timer.
When data driven learning is enabled, and the data driven table is not full, the multicast filtering
mode for all ports is ignored. That is, the multicast packets will be forwarded to router ports. If the
data driven learning table is full, the multicast packets will be forwarded according to the multicast
filtering mode.
Note that if a data-driven group is created and IGMP member ports are learned later, the entry will
become an ordinary IGMP snooping entry. That is, the aging out mechanism will follow the
ordinary IGMP snooping entry.
Format
config igmp_snooping data_driven_learning [all | vlan_name <vlan_name> | vlanid
<vlanid_list>] {state [enable | disable] | aged_out [enable | disable] | expiry_time <sec 1-
65535>}(1)
Parameters
all - Specify all VLANs to be configured.
vlan_name - Specify the VLAN name to be configured.
<vlan_name> - Enter the VLAN name here.
vlanid - Specify the VLAN ID to be configured.
<vlanid_list> - Enter the VLAN ID here.