Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
595
DES-3200-28/ME:admin#upload firmware_toTFTP 10.90.90.10 dest_file
D:/firmware.had src_file 4.00.020.had
Command: upload firmware_toTFTP 10.90.90.10 dest_file D:/firmware.had src_file
4.00.020.had
No such file or directory.
Fail!
DES-3200-28/ME:admin#
To upload configuration from TFTP:
DES-3200-28/ME:admin#upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
Command: upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
Connecting to server................... Done.
Upload configuration................... Done.
Success.
DES-3200-28/ME:admin#
To display a scenario where the uploading of the config file to the TFTP server failed, because of
an incorrect or missing filename from the source. This error can also be found if the directory, on
the source, does not exit.
DES-3200-28/ME:admin#upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg
src_file missing.cfg
Command: upload cfg_toTFTP 10.90.90.10 dest_file d:\config.cfg src_file
missing.cfg
No such file or directory.
Fail!
DES-3200-28/ME:admin#
To upload the attack log:
DES-3200-28/ME:admin#upload attack_log_toTFTP 10.90.90.10 dest_file
d:\attack.txt
Command: upload attack_log_toTFTP 10.90.90.10 dest_file d:\attack.txt
Success.
DES-3200-28/ME:admin#
69-3 config tftp
Description
This command is used to pre-configure TFTP server and file pathname on the TFTP server.