Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
614
Chapter 73
Traffic Segmentation
Command List
config traffic_segmentation [<portlist> | all] forward_list [null | all | <portlist>]
show traffic_segmentation {<portlist>}
73-1 config traffic_segmentation
Description
This command is used to configure the traffic segmentation.
Format
config traffic_segmentation [<portlist> | all] forward_list [null | all | <portlist>]
Parameters
<portlist> - Specify a range of ports to be configured.
all - Specify that all the ports will be used for this configuration.
forward_list - Specify a range of port forwarding domain.
null - Specify a range of port forwarding domain is null.
all – Specify all ports to be configured.
<portlist> - Specify a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure traffic segmentation:
DES-3200-28/ME:admin#config traffic_segmentation 1-10 forward_list 11-15
Command: config traffic_segmentation 1-10 forward_list 11-15
Success.
DES-3200-28/ME:admin#
73-2 show traffic_segmentation
Description
This command is used to display current traffic segmentation table.
Format
show traffic_segmentation {<portlist>}