Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
571
Chapter 65
Syslog and Trap Source-
interface Command List
config syslog source_ipif [<ipif_name 12> {<ipaddr>} | none]
show syslog source_ipif
config trap source_ipif [<ipif_name 12> {<ipaddr>} | none]
show trap source_ipif
65-1 config syslog source_ipif
Description
This command is used to configure syslog source IP interface.
Format
config syslog source_ipif [<ipif_name 12> {<ipaddr>} | none]
Parameters
ipif - Specify the IP interface name. If only specify this parameter, the least IPv4 address and the
smallest IPv6 address of ipif_name will be used as source IP addresses.
<ipif_name 12> - Enter the IP interface name here. This name can be up to 12 characters
long.
<ipaddr> - (Optional) Enter the IP address used for the configuration here.
none - Specify to clear the configured source IP interface.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
Configure syslog source IP interface:
DES-3200-28/ME:admin#config syslog source_ipif ipif3 14.0.0.5
Command: config syslog source_ipif ipif3 14.0.0.5
Success
DES-3200-28/ME:admin#
To clear the configured source IP interface for syslog: