xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
561
Chapter 64
Single IP Management
Command List
enable sim
disable sim
show sim {[candidates {<candidate_id 1-100>} | members{<member_id 1-32>} | group
{commander_mac <macaddr>} | neighbor]}
reconfig {member_id <value 1-32> | exit}
config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id 1-32>]
config sim [{[commander {group_name <groupname 64>} | candidate] | dp_interval <sec 30-90> |
hold_time <sec 100-255>}]
download sim_ms [firmware_from_tftp | configuration_from_tftp] {<ipaddr> <path_filename>
{[members <mslist 1-32> | all]}}
upload sim_ms [configuration_to_tftp | log_to_tftp] {<ipaddr> <path_filename> {[members
<mslist> | all]}}
config sim trap [enable | disable]
64-1 enable sim
Description
This command is used to configure the single IP management on the Switch as enabled.
Format
enable sim
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable SIM:
DES-3200-28/ME:admin#enable sim
Command: enable sim
Success.
DES-3200-28/ME:admin#