Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
398
43-3 debug stp show flag
Description
This command is used to display the STP debug level on specified ports.
Format
debug stp show flag {ports <portlist>}
Parameters
ports - (Optional) Specify the STP ports to display.
<portlist> - (Optional) Enter the list of port used for this configuration here.
If no parameter is specified, all ports on the Switch will be displayed.
Restrictions
Only Administrator-level users can issue this command.
Example
To display the debug STP levels on all ports:
DES-3200-28/ME:admin#debug stp show flag
DES-3200-28/ME:admin#debug stp show flag
Command: debug stp show flag
Global State: Disabled
Port Index Event Flag BPDU Flag State Machine Flag
----------------------------------------------------------
1 Disabled Disabled Disabled
2 Disabled Disabled Disabled
3 Disabled Disabled Disabled
4 Disabled Disabled Disabled
5 Disabled Disabled Disabled
5 Disabled Disabled Disabled
7 Disabled Disabled Disabled
8 Disabled Disabled Disabled
9 Disabled Disabled Disabled
10 Disabled Disabled Disabled
11 Disabled Disabled Disabled
12 Disabled Disabled Disabled
13 Disabled Disabled Disabled
14 Disabled Disabled Disabled
15 Disabled Disabled Disabled
16 Disabled Disabled Disabled
17 Disabled Disabled Disabled
18 Disabled Disabled Disabled
19 Disabled Disabled Disabled
20 Disabled Disabled Disabled
21 Disabled Disabled Disabled