Filter
Top Products
xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
414
<vlanid 2-4094> - The VLAN ID of the multicast VLAN to be created. This value must be
between 2 and 4094.
remap_priority - (Optional) The remap priority (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN. If none is specified, the packet’s original priority will be
used. The default setting is none.
<value 0-7> - Enter the remap priority value here. This value must be between 0 and 7.
none - Specify that the remap priority value will be set to none.
replace_priority - (Optional) Specify that packet’s priority will be changed by the Switch, based
on the remap priority. This flag will only take effect when the remap priority is set.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an IGMP snooping multicast VLAN with the VLAN name mv1 and the VID 2:
DES-3200-28/ME:admin#create igmp_snoop multicast_vlan mv1 2
Command: create igmp_snoop multicast_vlan mv1 2
Success.
DES-3200-28/ME:admin#
45-2 config igmp_snooping multicast_vlan
Description
This command is used to add member ports and source ports to a list of multicast VLAN member
ports. Member ports automatically become untagged members of the multicast VLAN and source
ports automatically become tagged members of the multicast VLAN. However, member ports of
one multicast VLAN are allowed to overlap with member ports on a different multicast VLAN.
A multicast VLAN must first be created using the create igmp_snooping multicast_vlan command
before the multicast VLAN can be configured.
Format
config igmp_snooping multicast_vlan <vlan_name 32> {[add | delete] [member_port
<portlist> | [source_port <portlist> | untag_source_port <portlist>] | tag_member_port
<portlist>] | state [enable|disable] | replace_source_ip <ipaddr> | remap_priority [<value 0-
7> | none] {replace_priority}}
Parameters
<vlan_name 32> - Enter the multicast VLAN here. The VLAN name can be up to 32 characters
long.
add - Specify that the port will be added to the specified multicast VLAN.
delete - Specify that the port will be deleted from the specified multicast VLAN.
member_port - A member port or range of member ports to be added to the multicast VLAN.
The specified range of ports will become untagged members of the multicast VLAN.
<portlist> - Enter the list of port to be configured here.
source_port - A port or range of ports to be added to the multicast VLAN.