Chapter 3. IBM iSeries and AS/400e 250 models and packages 63
3.5 iSeries and AS/400e Model 250 overview
The following table provides the minimum and maximum capacities for the Model 250
Package configurations.
PCI cards are subject to plugging rules. See PCI Card Placement Rules for the IBM eServer
iSeries Server, REDP-3638 for details.
Power and packaging
#1402 Line cord 9-ft 120 volt
The #1402 specifies a 9-ft (2.8 m), 15 Amp, and 120 volt (U.S. default). The #1402 specify feature provides one line cord.
One #1402 must be ordered for the system unit and one for the expansion unit. If only the system unit is ordered, only
one line cord is required.
#1403 Line cord 9-ft 240 volt
The #1403 specifies a 9-ft (2.8 m), 15 Amp, and 240 volt. The #1403 specify feature provides one line cord. One #1403
must be ordered for the system unit and one for the expansion unit. If only the system unit is ordered, only one line cord
is required.
#143x Line cord 2.8 m 200 volt/10 amp Power Cord
The #143x specifies a 2.8 m, 10 Amp, and 200 volt. The #143x specify feature provides one line cord. One #143x must
be ordered for the system unit and one for the expansion unit. If only the system unit is ordered, only one line cord is
required.
#1430 Australia/New Zealand
#1431 EU/Asia
#1432 Denmark
#1433 South Africa
#1434 United Kingdom
#1435 Swiss
#1436 Italy
#1437 Israel
#7102 #7102 System Expansion Unit
The #7102 System Expansion Unit allows the addition of up to nine PCI cards. It includes a base controller (CCIN 2824)
with 32 MB of memory as standard and can have another added by installing a #2824 PCI Feature Controller. The #7102
can also support one #2857 Integrated PC Server or one #2866 PCI Integrated Netfinity Server. The #7102 additionally
supports up to six disks (driven by the same disk controller located in the system unit).
Maximum: One per system; requires one #1402 or #1403 line cord
Minimum operating system level: OS/400 V4R4
Main storage
Base There are no features to specify the base memory of 256 MB on the Model 250 #2295 and #2296 Processors.
The base memory positions contain two 128 MB DIMMs (CCIN 3022).
Main storage cards must be added in pairs on a Model 250 to a total maximum of six storage cards. There are no feature
exchanges when swapping memory DIMMs.
#3022 128 MB Main Storage Card
Plugs directly into the processor. Must be added in pairs.
Maximum: Six
The #3022 is a Customer Install Feature.
The #3022 was withdrawn from marketing on 01 June 2006.
#3024 256 MB Main Storage Card
Plugs directly into the processor. Must be added in pairs.
Maximum: Two
The #3024 is a Customer Install Feature.
The #3024 was withdrawn from marketing on 01 June 2006.
