Chapter 13. Cable part numbers for IBM iSeries and AS/400e systems 463
Refer to the following resources for an explanation of HSL configuration rules and placement
considerations:
IBM eServer iSeries Migration: A Guide to Upgrades and Migrations to POWER
Technology, SG24-7200
This IBM Redbook also contains configuration rules for iSeries models and towers.
IBM eServer iSeries Migration: System Migration and Upgrades at V5R1 and V5R2,
SG24-6055
This IBM Redbook also contains configuration rules for iSeries models and towers.
High-speed Link Loop Architecture for the IBM eServer iSeries Server: OS/400 Version 5
Release 2, REDP-3652
iSeries Information Center at:
http://publib.boulder.ibm.com/infocenter/eserver/v1r2s/en_US/index.htm
#1475 #1475 - 10 m HSL to HSL-2 Cable
The #1475 - 10 m HSL to HSL-2 Cable is used to connect HSL and HSL-2/RIO-G ports in towers and system units.
Supported on Models 820, 830, 840
Minimum operating system level: i5/OS V5R3
The #1475 is a Customer Install Feature
#1482 #1482 - 3.5 m HSL-2 Cable
The #1482 - 3.5 m HSL-2 Cable is used to connect HSL-2/RIO-G ports in towers and system units.
Supported on Models 820, 830, 840
Minimum operating system level: i5/OS V5R3
The #1482 is a Customer Install Feature
#1483 #1483 - 10 m HSL-2 Cable
The #1483 - 10 m HSL-2 Cable is used to connect HSL-2/RIO-G ports in towers and system units.
Supported on Models 820, 830, 840
Minimum operating system level: i5/OS V5R3
The #1483 is a Customer Install Feature
#1485 #1485 - 15.0 m Copper HSL-2 Cable
The #1485 - 15 m HSL-2 Cable is used to connect HSL-2/RIO-G ports in towers and system units.
Supported on Models 820, 830, 840
Minimum operating system level: i5/OS V5R3
The #1485 is a Customer Install Feature
