Chapter 5. IBM AS/400e 720, 730, and 740 models 161
#2745 #2745 PCI 2-Line WAN IOA
The #2745 supports up to two multiple protocol communications ports when one or two of the following cables are
attached:
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0350 V.24/EIA232 20-ft (6 m) enhanced PCI cable
#0351 V.24/EIA232 50-ft (15 m) enhanced PCI cable
#0352 V.24/EIA232 80-ft (24 m) enhanced PCI cable
#0353 V.35 20-ft (6 m) PCI cable
#0354 V.35 50-ft (15 m) PCI cable
#0355 V.35 80-ft (24 m) PCI cable
#0356 V.36 20-ft (6 m) PCI cable
#0357 V.36 50-ft (15 m) PCI cable
#0358 V.36 150-ft (45 m) PCI cable
#0359 X.21 20-ft (6 m) PCI cable
#0360 X.21 50-ft (15 m) PCI cable
#0365 V.24/EIA232 80-ft (24 m) PCI cable
#0367 Operations Console PCI Cable 20-ft (6 m)
The #0367 is used to support the Operations Console function on CPU Models supporting LPAR (OS/400 V4R4 and later).
A maximum of one #0367 Operations Console PCI Cable is allowed per #2745.
PCI card slots required: One (low speed only with OS/400 V4R3)
Supported on Model 720.
#2750 #2750 PCI ISDN BRI U Adapter (available in the United States and Canada only)
The #275 is a 4-port (8-channel) ISDN BRI (basic rate) full-sized PCI card. Each port consists of 2B+D configuration. The
#2750 is the “U”-bus (2-wire) version of the ISDN BRI PCI card. The #2750 feature supports the following protocols:
PPP (communicates with remote analog modems (V.90) as well as with remote ISDN devices)
IDLC
Fax
Four 30-ft (9.3 m) RJ-45 to RJ-45 network cables are shipped with each #2750 feature. For configuration purposes, each
#2750 counts as eight lines (two lines per port) toward the system communication maximums. Supports full duplex.
Prerequisite: #2824 PCI Feature Controller
Requirements: The #2750 requires country (region) certification or homologation.
Full-sized PCI card slot
Maximum: One per IOP
Minimum operating system level: OS/400 V4R4 and PTF MF22528, or Cumulative PTF Package C9313440
#2751 #2751 PCI ISDN BRI S/T IOA
The #2751 is a 4-port (eight channel) ISDN BRI (basic rate) full-sized PCI card. Each port consists of 2B+D configuration.
The #2751 is the “S/T”-bus (four wire) version of the ISDN BRI PCI card.
This requires a network terminating device in the circuit. In the United States and Canada, this must be provided by the
client. In other countries (regions), it is most likely provided by the telephone company.
The #2751 supports the following protocols:
PPP (communicates with remote analog modems (V.90) as well as with remote ISDN devices)
IDLC
Fax
Four 30-ft (9.3 m) RJ-45 to RJ-45 network cables are shipped with each #2751 feature. For configuration purposes, each
#2751 counts as eight lines (two lines per port) towards the system communication maximums. Supports full duplex.
The #2751 requires country (region) certification or homologation.
Prerequisite: #2824 PCI Feature Controller
Requirements: A full-sized PCI card slot
Maximum: One per IOP
Minimum operating system level: OS/400 V4R4 and PTF MF22528, or Cumulative PTF Package C9313440
