108 iSeries and AS/400e System Builder
#2793
#9793
(cont.)
#2793 2-Line WAN IOA with Modem
The #0367 cable ships with a 25-pin to 9-pin adapter. Multiple #0367 cables can be ordered (but only one per #2793) to
serve as consoles for secondary partitions when logical partitioning (#0140) is specified.
ECS is supported from the RVX port and one of the following cables is required to support ECS: #0348, #0349, or #0365.
ECS is supported from the Modem (V.92) port.
The #9793 supports the #5544 System Console on Operations Console on the V.92 port for dial-in Operations Console
with OS/400 V5R2. The #9793 supports the #0367 Operations Console PCI Cable on the RVX port to directly connect the
Operations Console.
Direct connection of the Operations Console is mutually exclusive with V.92 support of the dial-in Operations Console.
The #2793 does not support the remote ring indicate function.
For further configuration information, see:
http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
See “Soft rules: iSeries IOA requirements” in PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638
for additional restrictions.
Minimum operating system level: OS/400 V5R2
#2794
#9794
#2794 2-Line WAN IOA with Modem
The #2794/#9794 is a 2-line WAN with Modem adapter and is the CIM version that is offered only in Australia and New
Zealand. Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression, and V.34
Fax modem and Fax functions such as ECM and 2D/1D conversion. Port 0 does not provide sync modem capabilities
(SDLC and Sync PPP). Port 1 is the RVX port and supports multiple communications protocols.
Select one of the following cables to attach to port 0 (modem port):
#1019 Modem Cable-Australia
#1020 Modem Cable-China (Hong Kong S.A.R.)/New Zealand
Select one of the following cables to attach to port 1 (RVX port):
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0356 V.36 20-ft PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #0367 cable ships with a 25-pin to 9-pin adapter. Multiple #0367 cables can be ordered (but only one per #2794) to
serve as consoles for secondary partitions when logical partitioning (#0140) is specified.
ECS is supported from the RVX port and one of the following cables is required to support ECS; #0348, #0349 or #0365.
ECS is supported from the Modem (V.92) port.
The #9794 supports the #5544 System Console on Operations Console on the V.90 port for dial-in Operations Console
with OS/400 V5R2. The #9794 supports the #0367 Operations Console PCI Cable on the RVX port to directly connect the
Operations Console.
Direct connection of the Operations Console is mutually exclusive with V.92 support of the dial-in Operations Console.
The #2793 does not support the remote ring indicate function.
For further configuration information, see:
http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
See “Soft rules: iSeries IOA requirements” in PCI Card Placement Rules for the IBM eServer iSeries Server, REDP-3638
for additional restrictions.
Minimum operating system level: OS/400 V5R2
