172 iSeries and AS/400e System Builder
#6618
(cont.)
#6618 Integrated Netfinity Server (SPD)
A #0221 Ethernet on IPCS is required for each #2723/#9723 selected to run on the #6618.
A #0220 Token-ring on IPCS is required for each #2724/#9724 selected to run on the #6618.
A #0222 100/10 Mbps Ethernet on IPCS is required for each #2838/#9738 selected to run on the #6618.
When running Windows NT on the #6618, then:
A minimum of 64 MB IOP memory is required. The maximum total memory is 1024 MB.
The #0325 Integrated PC Server Extension Cable for Windows NT is required.
The #1700 Integrated PC Server Keyboard or Mouse for Windows NT is the default in the U.S.A.
There is a maximum of one 100/10 Mbps Ethernet IOA in the two native iSeries slots.
There is a maximum of two 100/10 Mbps Ethernet IOAs.
A display is required to support Windows NT on the IPCS.
Windows NT is not supported with after OS/400 V5R2. Upgrade to Windows 2000.
For keyboard or mouse and display support in countries (regions) outside the U.S., see:
http://www.ibm.com/eserver/iseries/integratedxseries/
When running OS/2 on the #6618, then:
The #0325 and #1700 are not allowed.
Only two of the LAN IOA slots can be used and only one can contain a #2838/#9738 PCI 100/10 Mbps Ethernet IOA.
A maximum of one 100/10 Mbps Ethernet IOA can be in the two native iSeries slots.
A maximum of 512 MB IOP memory is supported.
When running Novell NetWare on the #6618, then:
The #0325 and #1700 are not allowed.
Only two of the LAN IOA slots can be used and only one can contain a #2838/#9738 PCI 100/10 Mbps Ethernet IOA.
Both can support native iSeries functions.
A maximum of 256 MB IOP memory is supported.
SPD slots required: Three contiguous slots
The #6618 cannot be placed in #5044 System Unit Expansion Rack.
The third LAN and the second #2838 can only be used if running Windows NT on the #6618.
All three PCI slots can be used for the Integrated Netfinity Server with only two of the three slots supporting native iSeries
functions.
A maximum of two #2838/#9738 can be used on each Integrated Netfinity Server: one native and one Windows NT
dedicated.
OS/2 and Novell NetWare are not supported with OS/400 V5R1.
Minimum operating system level: OS/400 V4R3 and Cumulative PTF Package C8349430
The #6618 was withdrawn from marketing on 28 December 2001.
#8664 Base Fiber Distributed Data Interface Adapter (SPD)
The #8664 provides one interface to connect an iSeries or AS/400e to an FDDI LAN, which complies with ANSI X3T9.5
and ISO 9314 standards. It consists of a card, a wrap connector, and Licensed Internal Code, which supplies IEEE 802.2
LLC, ANSI X3T9.5/ISO 9314 MAC functions, and ANSI X3T9.5 SMT functions. A multi-node (62.5/125 micron) FDDI
optical fiber jumper cable to connect the adapter to the FDDI ring must be ordered separately.
SPD slots required: One
Supported on Models 730 and 740
#8665 Base Shielded Twisted-Pair Distributed Data Interface Adapter (SPD)
The #8665 provides one interface to connect to an FDDI LAN, which is constructed of IBM Cabling System Type 1, 2, 6,
or 9 shielded twisted-pair wiring. It consists of a card, a wrap connector, and Licensed Internal Code, which supplies IEEE
802.2 LLC, ANSI X3T9.5/ISO 9314 MAC functions, and ANSI X3T9.5 SMT functions. IBM FDDI copper jumper cables to
connect the adapter to the FDDI ring must be ordered separately.
SPD slots required: One
Supported on Models 730 and 740
