A SERVICE OF

logo

6 iSeries and AS/400e System Builder
Notes:
1. DIMMS should be plugged in pairs in a sequential order, without leaving a gap.
2. Base memory cannot be upgraded.
3. When the upper half of the riser card is used (slot b), all DIMMS in those slots must match
the corresponding bottom (a) slots (that is, quad).
4a
3a
2a
Base Memory 1a
4b
3b
2b
1b
4a
3a
2a
Base Memory 1a
4b
3b
2b
1b
Model 170 Main Storage Riser Card (M02)
for Processors #2385, #2386, #2388, #2408, #2409