Chapter 4. IBM iSeries 270 models 101
#2892
(cont.)
#2892 PCI Integrated xSeries
One #0223 100 Mbps Token-Ring Specify is required for each #2744 selected to run on the #2892.
One #0226 1 Gbps Ethernet Specify is required for each #5700 or #5701 selected to run on the #2892.
The #2892 PCI Integrated xSeries Server does not require a #2843, #2844, #9943 or #9944 IOP, but placement is limited
to specific slots within the various system towers and expansion towers. The #2892 PCI Integrated xSeries Server requires
two PCI slots and does not extend into a third slot. The #2892 PCI Integrated xSeries Server supports only the Windows
2000 Server and Windows 2003 Server operating systems. The #2892 ships with a standard keyboard/mouse splitter
cable, and can support either a standard or USB 1.1 keyboard, mouse, or both.
The following rules apply:
The #0325 (IPCS Extension Cable for Windows) is the default (but can be removed).
The #1700 (IPCS Keyboard/Mouse for Windows) is the default (in those countries or regions offering it).
A display must be connected to the #2790 PCI Integrated Netfinity Server to support Windows.
For non-U.S. keyboard, mouse and display, see:
http://www.ibm.com/eserver/iseries/integratedxseries/
The #2892 PCI Integrated xSeries Server is supported in the system tower of the Model 270.
Native OS/400 functions are not supported.
The #2892 does not support external host LAN.
The #2849 10/100 Mbps Ethernet Adapter is not supported on the #2892 Integrated xSeries Server.
Minimum operating system level: OS/400 V5R2
The #2892 is a Customer Install Feature.
The #2892 was withdrawn from marketing on 01 January 2004.
#4810 #4810 PCI Integrated xSeries Server
The #4810 PCI Integrated xSeries Server contains a 2.0 GHz processor and four memory slots. Each server memory slot
can contain one of the following features, providing a total main storage capacity from 1024 MB to 4096 MB:
#0446 - 512 MB Server Memory
#0447 - 1 GB Server Memory
A minimum of two server memory cards are required with each #4810. Server memory cards must be installed in identical
capacity pairs. On model upgrades or MES orders, a #4810 can be ordered without memory features if usable supported
memory features already exist on the installed system.
The #4810 includes one embedded 100/10 Mbps Ethernet LAN controller. The #4810 can support the following LAN IOAs
in combination:
#2744 PCI 100 Mbps Token Ring IOA
#5700 PCI 1 Gbps Ethernet IOA
#5701 PCI 1 Gbps Ethernet UTP IOA
The #4810 can be ordered without any LAN IOA features.
When a LAN feature is used in conjunction with a #4810, the following ordering rules apply:
One #0223 100 Mbps Token-Ring Specify is required for each #2744 driven.
One #0226 1 Gbps Ethernet Specify is required for each #5700/#5701 driven.
Up to three IOA LAN features can be supported by the #4810, depending on the system unit/tower position into which
the #4810 is placed.
Native OS/400 functions are not supported.
The #4810 does not support external host LAN.
The #4810 is supported in the system unit of Model 270. It is also supported in the #5075 and #0595/#5095 when these
towers are attached to a Model 270.
The #4810 does not require a #2843, #2844, #9943 or #9844. Placement is limited to specific slots within the various
system units and expansion towers.
