178 iSeries and AS/400e System Builder
#8818 #8818 17.54 GB Optional Base Two-byte Disk Unit 10k RPM (Ultra SCSI)
The #8818 provides a 3
½-inch single disk unit with 17.54 GB capacity as the base disk unit in place of the #9707. It is
supported only in the system unit or #5064/#9364 system unit expansion. It is not supported on the #9364 with the #6502,
#6512, or #6530.
Supported on Model 720
Minimum operating system level: OS/400 V4R4
The #8818 was withdrawn from marketing on 28 December 2001.
#8824 17.54 GB Optional Base 2-Byte Disk Unit (Ultra SCSI)
The #8824 provides a 3
½-inch single disk unit with 17.54 GB capacity as the base disk unit in place of the #9707.
Supported on Model 720
Minimum operating system level: OS/400 V4R2
The #8824 was withdrawn from marketing on 31 January 2001.
#9606 1.967 GB Base Disk Unit
The #9606 provides a 3
½-inch single disk unit with 1.967 GB capacity as base disk unit.
Supported on Models 730 and 740
#9707 #9707 4.19 GB Base 2-byte Disk Unit (Ultra SCSI)
The #9707 provides a 3
½-inch single disk unit with 4.19 GB capacity as the default base disk unit.
Supported on Model 720
The #9707 was withdrawn from marketing on 29 January 2000.
#9907 4.19 GB Base 2-byte Disk Unit (Ultra SCSI)
The #9907 provides a 3
½-inch single disk unit with 4.19 GB capacity as the default base disk unit.
Supported on Models 730 and 740
RPQ
843977
RPQ 843977 is for clients who want to move 4/8/17 GB disk units from one AS/400 to another AS/400. The RPQ provides
hardware for mounting one disk unit. The hardware in this RPQ allows for mounting #6607/#6907 (4.194 GB unit), #6713
(8.58 GB unit), and #6714 (17.54 GB unit) in the system unit of a Model 640/650/S30/S40/730/740 and in the #5052,
#5055, #5057, #5058, #5070, #5071, #5072, #5073, #5080, #5081, #5082, or #5083 disk expansion units and tower.
These target enclosures use SPD technology. After the disk drives are installed, process a Record Purposes Only (RPO)
to add a #6607/#6907 for each #6607/#6907 added, a #6713 for each #6713 added, and a #6714 for each #6714 added.
RPQ
843978
RPQ 843978 is for clients who want to move 4/8/17 GB disk units from one AS/400 to another AS/400. The RPQ provides
hardware for mounting one disk unit. The hardware in this RPQ allows for mounting device types #6607/#6907 (4.194 GB
unit), #6713 (8.58 GB unit), and #6417 (17.54 GB unit) in the system unit of a Model 170, 600, S10, 620, S20 or 720 and
the #7101, #7102, #5064, or #9364 System Unit Expansion units and towers. After the disk drives are installed, process
an RPO to add a #6807 for each #6607/#6907 added, add a #6813 for each device #6713 added, and add a #6824 for
each #6417 added.
RPQ
847102
RPQ 847102 ships the disk mounting hardware and instructions required to convert a #6717/#6817 to a #4317, and a
#6718/#6818 to a #4318. One RPQ is required for each disk unit to be converted.
See “RPQ 847102” on page 277 for a full description.
Internal tape units and CD-ROM
Supported
media
See 9.8, “QIC and VXA-2 tape specifications and compatibility for iSeries and AS/400e systems” on page 378, for the
supported media for each tape device.
#1349 1.2 GB ¼-inch Cartridge Tape Unit Conversion Kit
The #1349 provides the hardware for migrating a #6368 1.2 GB
¼-inch cartridge tape unit. It is supported only in the
system unit or #5064/#9364 system unit expansion.
Supported on Model 720
#1350 2.5 GB ¼-inch Cartridge Tape Unit Conversion Kit
The #1350 provides the hardware for migrating #6369 and #6380 2.5 GB ¼-inch Cartridge Tape Unit. It is supported only
in the system unit or the #5064/#9364 system unit expansion.
Supported on Model 720
