Chapter 4. IBM iSeries 270 models 89
#0142 Linux Partition Specify
The #0142 is used to specify that this system is to be logically partitioned with a Linux partition. Specify one #0142 for each
Linux partition required. Only Linux direct attached features are allowed within a Linux partition.
There are no minimum number of Linux direct attached features required per Linux partition. A Linux partition can exist
without any Linux direct attached features in it (in this case, all I/O is virtualized by way of the iSeries server).
Linux Direct Attach Features: The following features can be attached directly to a Linux partition.
#0601 - Direct Attach - #2743 PCI 1 Gbps Ethernet IOA
#0602 - Direct Attach - #2760 PCI 1 Gbps Ethernet UTP IOA
#0603 - Direct Attach - #2744 PCI 100 Mbps Token-Ring IOA (withdrawn from marketing on 01 June 2006)
#0604 - Direct Attach - #2763 PCI RAID Disk Unit Controller
#0605 - Direct Attach - #4748 PCI RAID Disk Unit Controller
#0606 - Direct Attach - #4778 PCI RAID Disk Unit Controller (withdrawn from marketing on 19 November 2004)
#0607 - Direct Attach - #4838 PCI 100/10 Mbps Ethernet IOA
#0608 - Direct Attach - #4745 PCI WAN IOA (withdrawn from marketing on 01 June 2006)
#0609 - Direct Attach - #2772 PCI Dual WAN/Modem IOA (withdrawn from marketing on 01 June 2006)
#0610 - Direct Attach - #2773 PCI Dual WAN/ModemIOA (AP only)
#0612 - Direct Attach - #2766 PCI Fibre Channel Disk Controller (withdrawn from marketing for new orders only on
01 April, 2005)
#0613 - Direct Attach - #2742 PCI 2-Line WAN IOA
#0614 - Direct Attach - #2793 PCI 2-Line WAN w/Modem
#0615 - Direct Attach - #2794 PCI 2-Line WAN w/Modem
#0616 - Direct Attach - #2805 PCI Quad Modem IOA
#0617 - Direct Attach - #2806 PCI Quad Modem (CIM) (AP only)
#0618 - Direct Attach - #2757 PCI-X Ultra RAID Disk Controller (withdrawn from marketing on 01 June 2006)
#0619 - Direct Attach - #2782 PCI-X RAID Disk Unit Controller
#0620 - Direct Attach - #5700 PCI 1 Gbps Ethernet IOA
#0621 - Direct Attach - #5701 PCI 1 Gbps Ethernet UTP IOA
#0623 - Direct Attach - #2849 PCI 100/10 Mbps Ethernet IOA (withdrawn from marketing on 01 June 2006)
#0624 - Direct Attach - #5702 PCI-X Ultra Tape Controller (withdrawn from marketing on 01 June 2006)
#0626 - Direct Attach - #2787 PCI-X Fibre Channel Disk Controller
#0627 - Direct Attach - #2780 PCI-X Ultra4 RAID Disk Controller
#0628 - Direct Attach - #5703 PCI-X RAID Disk Unit Controller
See the descriptions of the individual features to understand the capabilities and PCI slot limitations of the features
attached directly to Linux partitions. Linux direct attach features do not use or require PCI IOPs. Linux direct attach features
are only supported in a secondary LPAR partition and require OS/400 V5R1 running in the primary partition. Linux direct
attach features cannot be accessed by OS/400 partitions. The supported and minimum Linux operating system is SUSE
LINUX Enterprise Server 9 for POWER or Red Hat Enterprise Linux AS for POWER Version 3.
Prerequisite: Processors #2431, #2432, #2434, #2452, or #2454
Corequisite: The #0140 Logical Partition Specify
Maximum with OS/400 V5R1: Three on processors #2431, #2432, and #2452; seven on processors #2434 and #2454
Maximum with OS/400 V5R2: Nine on processors #2431, #2432, and #2452; 19 on processors #2434 and #2454
Minimum operating system level: OS/400 V5R2
#0205 #0205 RISC-to-RISC Data Migration
Specify code is used when a client orders a new (RISC) iSeries server to replace an existing AS/400e RISC-based system.
The #0205 is ordered on the initial order of a Model 270.
Manufacturing loads only the System Licensed Internal Code (SLIC) up through QSYS of OS/400 when the #0205 is
ordered. Because of this limited loading of OS/400 by manufacturing, #5000 Software Preload Required is not allowed with
the #0205. The #0205 RISC-to-RISC Data Migration and #5000 Software Preload Required are mutually exclusive.
#0272
Renovated by IBM
The #0272 Renovated by IBM feature is a specify code used to indicate that the system is to be built from new or
refurbished parts.
